Full 115 Dynamic / Dynamic Highline

High level pallet wrapper, sturdy, easy to use and reliable, offers all performances requested to a pallet wrapper of this level.

Microprocessor control with touch screen panel to program, memorize and save the parameters and to memorize and choose the wrapping cycles. Possibility to program up to four wrapping programs in the version DYNAMIC, three of them can be memorized. In the version DYNAMIC HIGHLINE up to 99 ready wrapping cycles can be programmed and memorized The wrapping programs can be personalized according to use’s needs.

Technical Data

Available with four different spool carriages:
- MB: mechanical film brake, manually adjustable
PPS: motorized pre-stretch with interchangeable gears Available stretch ratios 150%, 200%, 250%
- EB: electromagnetic film brake adjustable from control panel
- PPS2: dual-motor pre-stretch system with pre-stretch ratio adjustable from 50% to 400%.
Turntable with 1500mm dameter
Max. load capacity 1500 kg.
Max. load dimensions 800x1200 mm.
Electric eye for pallet height detection
Max. wrapping height: 2500mm.
Alarms indicator.
Front and rear slots for fork lift transport
Keyboard lockout.
Average film consumption indicator (option for PPS e PPS2).

Options

Turntable with 1650mm diameter - load capacity 2000 kg.
Turntable with 1800 mm diameter - load capacity 2000 kg.
Turntable with 2200 mm diameter - load capacity 2000 kg.
Extended basement.
Wrapping height up to 2800mm.
Wrapping height up to 3200mm.
Wrapping height up to 3700mm.
Loading ramp.

Functions

Turntable speed.
Separate setting of upwards and downwards speed of spool carriage
Separate setting of top and bottom wraps
Delay of pallet height sensor
Separate film tension setting during upwards and downwards movement of film carriage (not available for MB).
Separate setting of pre-stretch ratio during upward and downwards movement of spool carriage (for PPS2 only).
Film cutting system ON/OFF (not available for MB).
Wrapping cycle start at pre-set height. (Dynamic Highline only).
Reinforcement wraps setting at a pre-set height (Dynamic Highline only).
Top plate function ON/OFF
Cross wrapping cycle, spool carriage upwards and downwards
Single wrapping cycle – spool carriage upwards or downwards only
Manual wrapping cycle
Wrapping cycle with top sheet.
Wrapping cycle with altimeter. (Dynamic Highline only).
Wrappind with preset height start (Dynamic Highline).
Wrapping cycle with reinforcement wraps (Dynamic Highline only).
Start and stop of wrapping cycle at pre-set heights. (Dynamic Highline only).
Layers wrapping
Push button for manual machine operation

PDF brochure

Download brochure

Full 110 Power TP
Full 115 Dynamic TP/ Dynamic Highline TP