Full 120 Automatic

Standing alone, rotary arm pallet wrapper with a simple and reliable film clamp and cutting device.

Microprocessor control with touch screen panel Possibility to program and personalize up to 99 wrapping programs. Programming, memorize and choose the wrapping cyclescan be done according to the needs of use

Available with two spool carriages
- PPS: motorized pre-stretch with interchangeable gears Available stretch ratios 150%, 200% and
- PPS2: dual-motor pre-stretch system with pre-stretch ratio adjustable from 50% to 400%.
Turntable diameter 1800mm.
Max.load capacity: 2000 kg.
Max. load dimensions 1000x1200 mm.
Electric eye for pallet height detection
Max. wrapping height: 2500mm.
Alarms indicator.
Front and rear slots for fork lift transport
Keyboard lockout.
Automatic film clamp and cutting device.
Safety fences with safety electric eyes barriers. External, additional command panel

Max. wrapping height 3000mm.
Max. wrapping height 3300mm.
Max. wrapping height 3700mm.
Access ramp

Turntable speed.
Separate setting of upwards and downwards speed of spool carriage
Separate setting of top and bottom wraps
Delay of pallet height sensor
Separate setting of film tension during upwards and downwards movement of spool carriage and during top and bottom wraps.
Separate setting of pre-stretch ratio during upwards and downwards movement of spool carriage and during top and bottom wraps. (with PPS2 only)
Predetermined height reinforcement with the possibility of adjusting the reinforcement turns.
Carriage start at reset height.
Automatic film cutting ON/OFF
Selection of wrapping cycles:
- Automatic.
- Semi-automatic.
- Upwards and downwards wrapping
- Wrapping only upwards or downwards
- Wrapping cycle with top sheet.